Constant Temperature Water Bath Shaking Incubator
1. Features
1. Features
- The latest design of anti-shake with floating buffer has the characteristics of low noise operation and no vibration of the whole machine.
- The drain valve on the left side of the shaker allows for easy drainage and cleaning and disinfection of the inside of the shaker.
- With a stainless-steel cover to prevent heat loss and moisture evaporation.
- 316L stainless steel liner, stainless steel electropolished rocking plate, spring, flask clamp.
- Intelligent sound and light alarm environment scanning microprocessor controller.
- The temperature control linearity is good, the fluctuation is small, and the temperature uniformity reaches 0.1 °C.
- The LCD screen double displays various setting parameters and measured parameters.
- Run the parameter memory function to avoid cumbersome operations.
- When the measured temperature deviates from the set temperature by 3 °C, the host automatically stops heating and sounds an audible alarm.
- Double over-temperature protection design, when the heater component has low water level and the test sample is over-temperature, the host can automatically cut off the heating power.
- With anti-dry protection.
- With power-off recovery function, after the external power supply suddenly loses power and calls again, the device can automatically resume operation according to the original setting procedure.
- 500 hours timing setting, the LCD display shows the remaining time, the timing end device can automatically stop and sound and light alarm.
- Leakage current and overcurrent protection systems ensure operator safety.
- Over-temperature, over-speed sound and light alarm emergency control system to ensure sample safety
3.Technical parameter
| Product number | LH-110*24(Desktop) |
| control method | P.I.D microcomputer environment scanning micro-processing chip control |
| Display method | LCD liquid crystal display |
| Oscillation mode | Reciprocating oscillation |
| Drive mode | Track balanced drive |
| security function | Upper and lower limit over-temperature sound and light alarm; upper and lower limit overspeed alarm; independent over-temperature protector; open door stop protection; leakage or over-current protection device; |
| Accessory function | Speed storage, call recovery, parameter memory, temperature speed correction, clock display |
| Programming function | Repeat, pacing, eight-segment curve programming |
| Reciprocating frequency | 20-200rpm |
| Frequency accuracy | ±1rpm |
| Stroke range | φ25mm |
| Maximum capacity | 24*250ml/500ml*15/1000ml*8 |
| Rocker size | 590*390(mm) |
| Spring rocker size | 590*390*80(mm) |
| Timing range | 0-999.59 hours |
| Temperature control range | Ambient temperature-100ºC |
| Temperature control accuracy | ±0.1(Constant temperature state) |
| Temperature uniformity | ±0.2ºC |
| Number of rocking plates | One |
| Inner cavity size | 700*455*260(mm) |
| Dimensions | 945*495*408(mm) |
| net weight | 55kg |
| Gross weight | 120kg |
| power | 2000W |
| Motor | 60W Inverter motor |
| Voltage | AC 200-240V 50-60HZ |
